Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2010 >> RL V6-3.7L >> Repair and Diagnosis >> Lighting and Horns >> Testing and Inspection >> Hazard Warning Switch Test/Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Hazard Warning Switch Test/Replacement




Hazard Warning Switch Test/Replacement

1. Remove the passenger's vent panel. Passenger's Vent Panel Removal/Installation

2. Push out the hazard warning switch (A) from behind the vent panel.

3. Disconnect the 6P connector (B) from the hazard warning switch.

4. Remove the two mounting screws, then remove the hazard warning switch from behind the upper panel.






5. Check for continuity between the terminals in each switch position according to the table.

6. If the continuity is not as specified, replace the bulb(s) (C) or the hazard warning switch.
NOTE: Both illumination bulbs are connected in parallel. If there is continuity, remove one illumination bulb at a time and recheck.





pro multis · About Operation CHARM