Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 1992 >> 100CS Quattro Wagon V6-2.8L (AAH) >> Repair and Diagnosis >> Cruise Control >> Brake Switch (Cruise Control) >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Switch (Cruise Control): Testing and Inspection

Fig. 1 Control Unit Harness Connector Terminal Identification:





Procedure for brake and clutch pedals are the same.
1. Connect multimeter US 1119, or equivalent, between control unit harness connector terminal 3 and ground, refer to Fig. 1.
2. Depress brake/clutch pedal.
3. If continuity exists, replace defective brake/clutch pedal switch.
4. If circuit is open, refer to Cruise CRUISE CONTROL SWITCH CHECK. Vehicles with 12 pin type control unit connectors refer to Vacuum Pump.
pro multis · About Operation CHARM