Power Door Lock Switch: Service and Repair

Removing
- Using flat screwdriver, pry off armrest handle cover.





- Remove mounting screws (arrows), take off handle.





- Remove trim -1-.





- Push inner door opening handle -2- in direction of arrow and pull out of door panel.

- Pry off cable clip.





- Unhook inner door opening cable.
- Disconnect connector for central door locking switch.





- Using small screwdriver, pry (arrows) and push out switch from lock.

Installing
Install all components in reverse order, noting the following:
- Press in switch until all tabs lock in.
- Hook on inner door opening cable must face up.