Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 1994 >> 100CS Quattro Sedan V6-2.8L (AAH) >> Repair and Diagnosis >> Starting and Charging >> Battery >> Service and Repair >> Battery, Remove and Installing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Battery, Remove and Installing





Removing
- Disconnect battery cable at negative (-) terminal.
- Disconnect battery cable at positive (+) terminal.
- Remove battery hold-down clamp (arrow).

Installing
- Ensure that battery is properly located and seated, attach hold down and tighten.
- Connect battery positive (+) cable.
- Connect battery ground (-) cable.


WARNING!
- Battery acid can cause severe burns. When working with electrolyte always wear goggles, rubber gloves, and apron. If electrolyte is spilled on skin or clothing, flush at once with large quantities of water. If it gets into eyes, immediately flush with large quantities of water for several minutes and call a doctor.
- Batteries produce explosive gases. Keep flames and sparks away and DO NOT smoke near batteries.


CAUTION!
If the battery is not secured properly, normal shock and vibration can damage the battery plates, which result in premature battery failure.

pro multis · About Operation CHARM