Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 1994 >> 90CS Quattro V6-2.8L (AAH) >> Repair and Diagnosis >> Heating and Air Conditioning >> Compressor Speed Sensor >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Compressor Speed Sensor: Testing and Inspection

Compressor Speed Sensor:





- Switch ignition off.
- Disconnect harness connector from sensor -G111-.
Connector located in left-front of engine compartment
- Set digital multimeter (Fluke 83 or equivalent) to resistance measuring range (ohm).
- Connect multimeter to connector -A- between two terminals of sensor -G111-.
- Must be 1.0 - 1.5 K ohm
- Connect multimeter between Ground (GND) and each terminal of connector -A-.
- Must be infinite ohms (no continuity)

pro multis · About Operation CHARM