Compressor Speed Sensor: Service and Repair

REMOVING AND INSTALLING:

Compressor Speed Sensor:

- Discharge A/C refrigerant system.
- Disconnect speed sensor harness connector.
- Remove screws -B-.
- Remove sensor -A-.

Install in reverse order of removal noting the following:
- With sensor removed, inspect teeth on sensor wheel inside compressor for damage (4 teeth around circumference).
- Replace O-ring -C-.
O-ring: 15.5 mm inside diameter, 1.5 mm thickness
- Install screws -B-.
- Tightening torque: 5 Nm (44 in. lb)