Voltage Supply and Module Locations

VOLTAGE SUPPLY AND MODULE LOCATIONS




Fig. 1 Airbag voltage supply (B+) connector (red), installation location

A - Connector cover
B - Connector clip

The red, single-pin airbag voltage supply (B+) connector is secured in clip -B-, behind cover -A- -arrow-, on the driver's side lower instrument panel cover.

WARNING!
Always disconnect the battery Ground (GND) strap and airbag voltage supply (B+) connector before working on the airbag system or other related systems (for example, when removing steering wheel).




Fig. 2 Airbag control module, installation location The Airbag control module is located behind the center console.

A - Connector
B - Bracket for connector
C - Airbag control module; torque to 6 Nm +1 Nm (53 in. lb +9 in. lb)

Note:
For center console, removing, -> Repair Group 70.