Track 1 Thru 12

Anti-Lock Brake System (Quattro) - Track 1-12:

COMPONENTS
G44 = ABS Wheel Speed Sensor, Right Rear
G45 = ABS Wheel Speed Sensor, Right Front
G46 = ABS Wheel Speed Sensor, Left Rear
G47 = ABS Wheel Speed Sensor, Left Front
J104 = ABS Control Module
F = Brake Light Switch
S29 = Fuse For Brake Lights, in Fuse Panel
S31 = Fuse For ABS , Differential Lock, in Fuse Panel
K - Wire Distributer For Data Link Connector (DLC); Terminal K

CONNECTORS
T2a = Wire Connector, double, below rear seat, right
T2b = Wire Connector, double, in engine compartment, right
T2c = Wire Connector, double, below rear seat, left
T2d = Wire Connector, double, in engine compartment, left
T2x = Wire Connector, double, black, in Plenum, Near Relay Panel (Data Link Connector)
T2z = Wire Connector, double, white, in Plenum, Near Relay Panel (Data Link Connector)
T10d = Wire Connector, 10 Point, blue, connector station in auxiliary relay panel


GROUNDS CONNECTION

NOTE: Grounds connections are indicated on the diagram by a numeric code inside a circle.

32 - Ground connection, behind instrument panel, left
83 - Ground connection -1-, in right wiring harness
100 - Ground connection -1-, in ABS wiring harness


HARNESS SPLICES

NOTE: Harness splices are points inside a wiring harness where two or more wires are crimped and/or soldered together. Harness splices are indicated on the diagrams by an alphanumeric code inside a circle.

A2 - Plus connection (15) in instrument panel wiring harness
A18 - Wire connection (54), in instrument panel wiring harness
A32 - Plus connection (30), in instrument panel wiring harness
J9 - Wire connection -1- (15a), in ABS wiring harness