Tracks 50-63

Engine Control Module - Track 50-63:

COMPONENTS
G4 - Crankshaft Position (CKP) Sensor
G62 - EGR Temperature Sensor
G28 - Engine Speed (RPM) Sensor
G98 - Engine Coolant Temperature (ECT) Sensor
G108 - Heated Oxygen Sensor (HO2S) II
G39 - Heated Oxygen Sensor (HO2S)
N71 - Idle Air Control (IAC) Valve
J192 - MFI Engine Control Module (ECM)
Z19 - Oxygen Sensor (O2S) Heater
Z28 - Oxygen Sensor (O2S) II Heater

CONNECTORS
T1a - Wire Connector, single, in engine compartment, right
T1r - Wire Connector, single, in engine compartment, right
T3l - Wire Connector, 3 Point, black, on Crankshaft Position (CKP) Sensor
T3m - Wire Connector, 3 Point, gray, on Engine Speed (RPM) Sensor
T5 - Wire Connector, 5 Point, black, connector station in auxiliary relay panel
T5h - Wire Connector, 5 Point, red, behind instrument panel, left

GROUND CONNECTION

NOTE: Grounds connections are indicated on the diagram by a numeric code inside a circle.

83 - Ground connection -1-, in right front wiring harness
124 - Ground connection, in engine compartment right wiring harness


HARNESS SPLICE

NOTE: Harness splices are points inside a wiring harness where two or more wires are crimped and/or soldered together. Harness splices are indicated on the diagrams by an alphanumeric code inside a circle.

D9 - Plus connection (15, via fuse 27), in right front wiring harness
D10 - Plus connection (30), in right front wiring harness