Speedometer, Removing and Installing

Speedometer, removing and installing (Nippon Seiki)

- Remove instrument cluster. Service and Repair




- Remove hex nuts -4- with washers and remove instrument panel light dimmer switch -3-.
- Remove screws -1- and remove Mini-Check system display unit -2-.




- Remove screws -1- and -4-.
- Disconnect speedometer harness connector -2-.

CAUTION! The printed circuit is fragile. Use extreme care in removing, installing or handling, or damage to the circuit will result.

- Carefully remove printed circuit -3-.




- Remove speedometer mounting plate screw -1-.
- Remove speedometer screws -3-.
- Remove speedometer mounting plate -2-.




- Remove speedometer -1-from front frame -2-.
- Install in reverse order of removal.