Dash Vents

Removing Air Outlet Vents:

- Make wire hook in shop, See Below.
- Insert wire hook, as shown.
- Use wire hook to remove vent from swivel fittings.

Installing Air Outlet Vents:

- Use wire hook to remove vent from swivel fittings (arrows).
- Install in reverse order of removal; note the following:
- Position swivel vent so that large notch is at top
- Make sure vent locks into place





(For Removing Instrument Panel Air Outlets)

- Make wire hook as shown:
- Wire diameter: 3 mm (1/8 in.)
- Dimension -X-: 6 mm (1/4 in.)