Display Group 011
DISPLAY OVERVIEWVAG 1551 Display Overview, Display Group 011:
Notes on display field 1:
^ At idle (CTP switch closed), an ignition timing of 12° BTDC is displayed in "Basic Setting" function 04 and in "Read Measuring Value Block" function 08.
^ When Engine Speed (RPM) is increased (CTP switch open), the current ignition timing without knock regulation and without IAC is displayed.
Notes on display field 2:
^ IAC is active only when the CTP switch is closed.
^ Knock regulation begins when engine load is greater than 40%, see display groups 013 and/or 014.
Notes on display field 3:
^ IAC is active only when the CTP switch is closed (at idle), see display field 4.
^ Ignition timing control to assist IAC occurs when the CTP switch is open at 0.0° crankshaft rotation.
^ IAC is blocked during "Basic Setting" function 04, display shows: 0.0° crankshaft rotation.
^ Ignition timing control to assist IAC during "Read Measuring Value Block" function 08 in CTP (without electrical consumers) occurs at 0.0° - 3.0° crankshaft rotation.