Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 1995 >> A6 Sedan (4A2) V6-2.8L (AAH) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> Scan Tool Testing >> Diagnosis With Scan Tool, Address Word 01 >> Basic Setting >> Display Group Diagnostic Charts >> Display Group 034
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Display Group 034

DISPLAY GROUP 034
Heating Current Of Front And Rear Heated Oxygen Sensors (HO2S), Banks 1 and 2

DISPLAY OVERVIEW

VAG 1551 Display Overview, Display Group 034:





NOTES
^ The values specified only apply with battery positive voltage (B+) between 12-14 volts, see display group 001, display field 4.
^ Heating current (B+) for the front HO2S, banks 1 and 2 is switched ON via the fuel pump relay (immediately when the engine starts). Ground (GND) is supplied by the ECM.
^ Heating current for the O2S behind TWC, banks 1 and 2, only switches on when the calculated exhaust gas temperature exceeds 420°C (788°F), see display group 036, display field 1. In order to achieve the calculated exhaust gas temperature after a cold start, vehicle must be driven approx. 20 seconds at and engine speed of 2500 RPM.

pro multis · About Operation CHARM