Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2007 >> A4 Sedan (8EC) L4-2.0L Turbo (BWT) >> Repair and Diagnosis >> Heating and Air Conditioning >> Compressor HVAC >> Compressor Clutch >> Service and Repair >> Removal and Replacement >> Drive Plate With Overload Protection, Removing And Installing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Drive Plate With Overload Protection, Removing And Installing



Drive Plate With Overload Protection, Removing And Installing

- Remove compressor.

Removing







- Remove bolts - A -.

NOTE: Use commercially available band wrench (with webbed band) to provide support at drive plate - C -.

Installing
- Install drive plate with overload safeguard - B - to drive plate - C -.
- Insert and hand-tighten bolts - A -.
- Check run-out of drive plate - B
- Tighten bolts - A - (tightening torque 10 Nm).
- Check run-out of drive plate - B - again
pro multis · About Operation CHARM