Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2007 >> A4 Sedan (8EC) V6-3.2L (BKH) >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Removal and Replacement >> Power Front Memory Seats >> Backrest Release Microswitch
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Backrest Release Microswitch






Backrest Release Microswitch





1 - Cable Tie

2 - Connector

3 - Retainer

4 - Micro Switch Backrest Release

• Removing

- Remove seat. Refer to => [ Seat ] Seat.

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Attach the front seat to the fixture for seat repair (VAS 6136).

- Remove side trim on sill side. Refer to => [ Side Trim, Sill Side ] Side Trim, Sill Side.

- Remove side trim on tunnel side. Refer to => [ Side Trim, Tunnel Side ] Side Trim, Tunnel Side.

- Remove the backrest. Refer to => [ Front Backrest ] Front Backrest.

- Remove backrest cover panel. Refer to => [ Backrest Cover ] Backrest Cover.

- Remove backrest frame. Refer to => [ Backrest Frame ] Backrest Frame.

- Remove cover and padding from backrest. Refer to => [ Backrest Cover and Cushion, Sport and Standard Seats ] Front Seat Covers and Cushion, Power Memory Seats.

- Use a screwdriver to pry out circlip - 3 -.

- Press the tabs - 5 - (Qty. 2) together and remove the micro switch - 4 -.

- Remove connector - 2 -.

• Installing

- Press the micro switch - 4 - in until the tabs - 5 - (Qty. 2) engage.

- Connect the connector - 2 -.

- Install the cover and padding from backrest. Refer to => [ Backrest Cover and Cushion, Sport and Standard Seats ] Front Seat Covers and Cushion, Power Memory Seats.

- Install the backrest. Refer to => [ Front Backrest ] Front Backrest.

- Install the seat. Refer to => [ Seat ] Seat.

- Install the backrest release micro switch. Refer to => [ Backrest Release Microswitch, Adjusting ] Power Front Memory Seats.

- Install the circlip - 3 -.

- Install the backrest frame. Refer to => [ Backrest Frame ] Backrest Frame.

- Install the backrest cover. Refer to => [ Backrest Cover ] Backrest Cover.

5 - Retainer Tabs (Qty. 2)

pro multis · About Operation CHARM