Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2007 >> A4 Sedan (8EC) V6-3.2L (BKH) >> Repair and Diagnosis >> Heating and Air Conditioning >> Compressor HVAC >> Service and Repair >> Compressor Drive Shaft
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Compressor Drive Shaft






Compressor Drive Shaft

Removing

- Remove compressor, refer to => [ Compressor, 4- or 6-Cylinder ] Compressor, 4- or 6-Cylinder.

- Remove boot - A -





- Remove driveshaft - B - from splines of drive pinion - C -

Installing

Installation is carried out in the reverse order, when doing this note the following:

- Check driveshaft - B -, splines must show no traces of wear and must be seated free of play in splines of drive wheel - C -.

- Coat splines of driveshaft - B - using clutch splining grease G 000 100 before installing.

- Insert driveshaft - B - before installing compressor and slide it into drive wheel - C - up to stop.





- After installing compressor, check installation position of boot - A -.
pro multis · About Operation CHARM