Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2007 >> A4 Sedan (8EC) V6-3.2L (BKH) >> Repair and Diagnosis >> Power and Ground Distribution >> Fuse Block >> Service and Repair >> Fuse Panel for Main Fuse
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuse Panel for Main Fuse






Fuse Panel for Main Fuse

Removing





- With ignition switched off, disconnect battery Ground (GND) wire. Refer to => [ Battery, Disconnecting and Connecting ] [1][2]Battery.

- Remove plenum chamber cover rubber seal in - direction of arrow -.

- Remove plenum chamber cover - 1 - forward.

- Fold cover - 2 - to side and remove nut - 3 - at electrical wire.





- Remove nut - 1 - for fuse panel at positive pole.

Installing

Install in reverse order of removal, observing the following:

- Connect battery. Required actions => [1][2]Battery.

Tightening Specifications




pro multis · About Operation CHARM