Input Shaft With 6 Lining Discs, Assembly Overview

Input shaft with 6 lining discs, assembly overview - 01J, Continuously Variable Transmission (CVT)

CAUTION!
^ Note the difference between input shafts with 6 and 7 lining discs.





1- Input shaft seal
^ Replace

2- Input shaft cover circlip
^ Replace with same thickness

3- Input shaft cover
^ After removing cover, input shaft cover ball bearing must be replaced

4- Piston
^ Check for wear

5- Pressure plate
^ Check for wear

6- Corrugated spring washer

7- Upper adjustment disc
^ Determine thickness
^ Replace

8- Coated plate
^ Qty. 6
^ Replace

9- Outer plate
^ Qty. 5
^ Replace

10- Lower adjustment disc
^ Determine thickness
^ Replace

11- Input shaft cylinder
^ Check for wear

12- O-Ring
^ Replace

13- Oil pipe
^ Check for wear