Input Shaft, Servicing With 6 Lining Discs

Input shaft, servicing with 6 lining discs - 01J, Continuously Variable Transmission (CVT)

CAUTION!
^ Servicing with the incorrect number of lining discs leads to input shaft damage after bringing vehicle into operation again.
^ In this case, the software in the Transmission Control Module (TCM) J217 does not match the number of lining discs.

There are two types of transmissions. They are differentiated according to transmission code:

1. Transmission with 7 lining discs serviced

These transmissions are installed in vehicles with 4-cyl. 1.9L TDI engine, 4-cyl. 2.0L TDI engine, 6-cyl. 2.5L TDI engine, 6-cyl. 3.0L MPI gasoline engine and 6-cyl. 3.2L FSI gasoline engine.

^ Refer to Input shaft with 7 lining discs, assembly overview

^ Refer to Input shaft with 7 lining discs, disassembling and assembling

2. Transmission with 6 lining discs serviced

These transmissions are installed in vehicles with all other engines.

^ Refer to Input shaft with 6 lining discs, assembly overview

^ Refer to Input shaft with 6 lining discs, disassembling and assembling