Bracket For Navigation System With CD Drive Control Module (J401)

Bracket for Navigation System with CD Drive Control Module (J401)

- Switch off all electrical consumers.

- Remove the key.

Removing

- Remove the right luggage compartment trim panel.

- Unclip the Towing Recognition Control Module (J345) - 1 - and swivel aside.





- Remove the screw - 2 - (2 Nm).

- Remove the nuts - arrows - (4 Nm).

- If present, remove Level Control System Control Module (J197).

- Disconnect all connectors to the Navigation System with CD Drive Control Module.

- Attach the (VAS 6223/9) - 1 - onto the MOST-Bus connector - 2 -.





- Remove bracket.

Installing

- Install in reverse order of removal.