Intake Manifold

With Plastic Intake Manifold

Intake Manifold Lower Section, Tightening Specification





Tighten the bolts - marrows - on the intake manifold lower section diagonally and in steps.

Tighten 10 Nm

Intake Manifold, Tightening Specification and Sequence





Tighten intake manifold screws in - 1 through 16 - sequence.

First tightening 8 Nm

Second tightening 11 Nm


With Magnesium Intake Manifold

Intake Manifold Tightening Sequence





Tighten intake manifold bolts in - 1 through 10 - sequence.

First tightening 8 Nm
Second tightening 9 Nm and tighten another 90 degrees