Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2007 >> S4 Quattro Sedan (8EC) V8-4.2L (BHF) >> Repair and Diagnosis >> Diagrams >> Connector Views >> Engine - Coolant Temperature Sensor/Switch >> Engine Coolant Temperature Sensor, Connector Assignment
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Coolant Temperature Sensor, Connector Assignment






Engine Coolant Temperature Sensor, Connector Assignment

Procedure

- Disconnect electrical connector at Engine Coolant Temperature (ECT) Sensor (G62):

• Vehicles with 3.2L FSI engine, Refer to => [ 3.2L FSI ] .

• Vehicles with 2.0L TDI engine, refer to => [ 2.0L TDI ] .

• Vehicles with 3.0L TDI engine, refer to => [ 3.0L MPI ] .

Terminal assignment of the 2-pin harness connector at Engine Coolant Temperature (ECT) Sensor (G62)





1. Sensor ground (GND)

2. Wire connection from Engine Coolant Temperature (ECT) Sensor (G62) to engine control module

pro multis · About Operation CHARM