Fresh Air Intake Duct Temperature Sensor

Fresh Air Intake Duct Temperature Sensor

Removing

- Remove glove compartment.

- Reach between the A/C unit and the base plate of the plenum chamber to temperature sensor - A - and rotate it in the direction of the - arrow - by approx. 90°.





- Pull temperature sensor - A - out of the A/C unit.

- Disconnect connector - B -.

• If the fresh air intake duct temperature sensor ( G89) cannot be removed:

• - Remove the dust and pollen filter. Refer to => [ Dust and Pollen Filter ].

• - Rotate temperature sensor - A - in the direction of the arrow by approx. 90° and remove it in the direction of the passenger compartment from the intake housing.





Installing

- Check the seating of O-ring seal - C - (if necessary moisten slightly with a lubricant).





Now install all removed components in reversed order.