Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2007 >> S8 Quattro Sedan (4E2) V10-5.2L (BSM) >> Repair and Diagnosis >> Lighting and Horns >> Tail Lamp Control Module >> Service and Repair >> LED Boards and Rear Taillamp Control Module, Removing and Installing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

LED Boards and Rear Taillamp Control Module, Removing and Installing



LED Boards And Rear Taillamp Control Module, Removing And Installing

NOTE: If LEDs are faulty, LED boards must be replaced together with control unit.







Removing

- Remove inner rear light.
- Press catches apart - arrows - and detach housing cover.
- Disconnect connector.







- Remove bolts - 1 through 3 - and remove LED boards with Taillamp Control Module.

Installing

Install in reverse order of removal, observing the following:
- Install inner rear light.

Tightening torque
LED boards and control module to rear light: 1 Nm
pro multis · About Operation CHARM