Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2011 >> A6 Sedan (4F2) V6-3.2L (CALA) >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Service and Repair >> Removal and Replacement >> Table of Contents >> Relay Carrier, General Information >> Base Mount with Right Instrument Panel Fuse Panel, Removing and Installing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Base Mount with Right Instrument Panel Fuse Panel, Removing and Installing







Base Mount with Right Instrument Panel Fuse Panel, Removing and Installing

Removing





- With ignition switched off, disconnect battery Ground (ND) wire => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove glove compartment.

- Release retaining springs - arrows - and press fuse panels - 1 - and - 2 - toward rear out of base mount.

- Remove bolts - 1 - and - 2 -.





- Remove base mount in - direction of arrow - from central tube for instrument panel.

Installing

Install in reverse order of removal, observing the following:

- Install glove compartment.

- Connect battery. Required actions => [ Vehicles with : ] Battery, Disconnecting and Connecting.

Tightening Specifications




pro multis · About Operation CHARM