Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2011 >> A6 Sedan (4F2) V6-3.2L (CALA) >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Service and Repair >> Removal and Replacement >> Vehicle Electrical System Control Module 2, Removing and Installing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Vehicle Electrical System Control Module 2, Removing and Installing







Vehicle Electrical System Control Module 2, Removing and Installing

Component location: Beneath central tube for instrument panel at bulkhead.

Removing

- If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or "Guided Functions".

- Select the function or path:





- Follow the instructions on the Vehicle Diagnosis Tester display.

- Switch off ignition and remove ignition key.

- Remove glove compartment.

- Press clip - 2 - aside - arrow - and pull Vehicle Electrical System Control Module 2 (J520) out of retaining frame.





- Disconnect electrical connector - 1 -.

Installing

Install in reverse order of removal, observing the following:

- Install glove compartment.
pro multis · About Operation CHARM