Operation CHARM: Car repair manuals for everyone.
Home >> BMW >> 1987 >> 325is (E30) L6-2494cc 2.5L SOHC (M20) >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Electronic Brake Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Electronic Brake Control Module: Service and Repair






REMOVE
- Remove instrument panel trim at bottom left.

CAUTION: Always turn "Off" ignition before removing or installing control unit.





- Push back clamp (1) and pull out multiple pin plug (2) to the right, and then disengage it to the left.
- Unscrew control unit on body.





Installation Note: Check for correct connection when replacing control unit. The multiple pin plug has a tab on the left side, for which the control unit must have an opening.

INSTALL
- Install in reverse order. Pay attention to installation notes.

CAUTION: Only use a control unit with the correct code number.

- First engage left side of plug and then press right side into clamp.
- Check the Antilock Brake System (ABS) for proper operation.
pro multis · About Operation CHARM