Operation CHARM: Car repair manuals for everyone.
Home >> BMW >> 2003 >> M3 Convertible (E46) L6-3.2L (S54) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Technical Service Bulletins >> All Technical Service Bulletins >> Engine Controls - DSC Not Recognized During Diagnostics
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Controls - DSC Not Recognized During Diagnostics

SI B34 01 05
Brakes

June 2005
Technical Service

This Service Information bulletin supersedes Service Measure B34 200 04 dated September 2004.

SUBJECT
Dynamic Stability Control (DSC) Not Recognized

MODEL
E46 (3 Series)

SITUATION

DSC control module cannot be automatically identified during diagnostic process.

CAUSE

Diagnostic software error.

CORRECTION

Manually identify the vehicle and then connect the diagnostic head to establish communication with the vehicle.

PROCEDURE

1. For all E46, except M3: the diagnostic software error will be corrected in CD39.

2. For M3: the diagnostic software error will be corrected in CD41.





Disclaimer
pro multis · About Operation CHARM