Electronic Evaluation Module

Electronic Evaluation Module





The electronic evaluation module of the IBS continuously registers the measured data. The IBS uses these data to calculate the following battery indicators.
^ Voltage
^ Current
^ Temperature
The IBS sends the calculated battery indicators to the DME via the BSD. The IBS calculates changes in battery SoC (state of charge)/SoH (state of health) based on information received from the DME on the SoC (state of charge) of the battery during the period of time between engine OFF and deactivation of the DME relay. After the DME relay has been switched off, the IBS continues to constantly observe the SoC (state of charge) of the battery.