84 10 050 Removing and Installing/Replacing USB Hub

84 10 050 - Removing and installing (replacing) USB hub





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Remove left front seat Removing and Installing Left or Right Front Seat (Normal / Manual)
- Remove front left entrance cover strip 51 47 000 Removing and Installing/Replacing Front (Inside) Left or Right Entrance Cover Strip
- Fold back carpet for passenger compartment at front left in direction of travel





Remove USB hub protective socket (1) from footwell insert (2).
Unlock catches (3) with a suitable tool and remove USB hub protective socket cover (5).

Installation Note:
Make sure USB hub protective socket cover (5) engages correctly on USB hub protective socket lower section.
Seal (4) must not be damaged; if necessary, replace USB hub protective socket cover (5).





Remove USB hub (1) from USB hub protective socket lower section (2).

Installation Note:
Make sure rubber grommet (4) is correctly seated on USB hub protective socket lower section (2).

Disconnect plug connection (3).