Replacing Complete Trailer Tow Hitch

71 60 051 - Replacing complete trailer tow hitch





Important!
When retrofitting a trailer tow hitch, it is absolutely essential to read and comply with the Notes on retrofitting a trailer towing device Notes on Retrofitting a Trailer Towing Device.





Necessary preliminary tasks:
- Remove rear bumper trim
- If necessary, release exhaust system suspension elements





Release screws (1) on both sides.
Unclip cable from fixture.
Remove trailer tow hitch support member (2).
Disconnect all plug connections.
Tightening torque 71 60 1AZ [1][2]Specifications.






Installation Note:
Vehicles up to production date 07.03.2005 only:
Knock out studs (1) towards inside and replace with M12x40 hexagon bolts.
Tightening torque 71 60 1AZ [1][2]Specifications.