33 41 005 Replacing Left Drive Flange on Rear Axle Shaft

33 41 005 Replacing left drive flange on rear axle shaft





Special tools required:
- 33 2 116 33 2 110 Removal and Installation Tool
- 33 2 160 33 2 160 Spacer Ring
- 33 2 201 33 2 200 Fixture
- 33 4 200 33 4 200 Tool Kit / Striker Fixture





Necessary preliminary tasks:
^ Remove output shaft
^ Remove brake disc
^ Remove pulse generator

Important!
Check sensor head and line from pulse sensor prior to installation for external damage, replacing if necessary.

Force drive flange with special tools 33 2 116 / 33 2 201, 33 2 160, 33 4 200 and 5 wheel bolts out of wheel bearing.

Note:





Rounded inside edge of special tool 33 2 160 must point to drive flange.





Important!
The wheel bearing is destroyed when the drive flange is removed and can not be reused!

Replace wheel bearing.

Installation:

Install output shaft.

Oil drive flange lightly and attach to splines of output shaft.

Draw drive flange into wheel bearing.





After installation:
^ Adjusting handbrake Adjustments