Removing and Installing Front Cross-Member

54 13 130 - Removing and installing front cross-member





Necessary preliminary tasks:
- Remove glass slide/tilt sunroof Removing and Installing Complete Glass Slide/Tilt Sunroof
- Remove control unit for glass slide/tilt sunroof Service and Repair
- Remove drive Replacing Drive With Gear (Front) for Actuating Slide/Tilt Sunroof





Release screws in marked area.
Tightening torque: 54 12 03AZ 54 12 Mechanical Components, Panorama Sunroof.
Feed cross-member (2) out of wiring harness (1) during removal.
If necessary, release fabric adhesive tape and replace.

Installation:
Pitch cables must be correctly located in guide