Parking Assist Control Module: Service and Repair

Removing And Installing/Replacing Control Unit (Park Distance Control)

Saloon/Sedan, Coupe:







Detach left trunk wheel arch trim in rear area.
Disconnect plug connections (1).
Slacken screws (2).
Feed holder for control unit (4) in direction of arrow out of elongated holes (3) and remove.







Replacement only:
Unscrew nuts (1).
Remove control unit (2) from control unit holder (3).

Convertible:
Remove lower section of side trim at rear right.







Release screws (1) and remove control unit holder (2).







Disconnect plug connections (4).

Replacement only:
Unscrew nut (1).
Pull control unit (2) in direction of arrow out of guide (3) and remove.

Installation Note: Pay attention to cable guide.

touring:
Slacken panel for trunk floor plate at front.







NOTE: For purposes of clarity: Illustration shows trunk floor removed.


Loosen nut (1). Unscrew nut (2).
Unfasten plug connection.
Raise control unit and remove.

compact:
Remove side panel cover.







Disconnect plug connections (1).
Unscrew nuts (2).
Lift out control unit (3).