64 11 377 Removing and Installing/Replacing Heater/Air Conditioner Operator Unit (Version Without CCC/ASK)

64 11 377 - Removing and installing or replacing heater/air conditioner operator unit (version without CCC/ASK)





Special tools required:





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge)!





Note:
Car Communication Computer (CCC)

Audio System Kontroller / Controller (ASK)





Insert special tool 00 9 340 as illustrated and unclip lower area of control panel trim (1).





Insert special tool 00 9 340 as illustrated and unclip side section of control panel (1).

Detach control panel (1) and disconnect plug connections.





Installation Note:
Make sure retaining clips (1) are fitted correctly.

If necessary, replace missing clips.





Note:
The centre console switch cluster (1) and the heater/air conditioner operator unit (2) are connected via the ribbon cable (4).





Replacement:

Important!
Risk of damage to operator unit (3)!

Carefully unclip operator unit trim (1) at inner retaining points (2) only.





Carefully unclip operator unit trim (2) at outer retaining points (2) only.

Remove trim (1) from operator unit (3).





Carry out programming/coding Programming and Relearning.