Manifold Pressure/Vacuum Sensor: Service and Repair

13 62 010 Removing And Installing/replacing Fuel Differential Pressure Sensor (N52/ N52K / N51)






Necessary preliminary tasks:
- E90, E91, E92, E93, E87, E82, E88, E84:
Remove lower section of microfilter housing
64 31 092 Removing and Installing/Replacing Microfilter Housing (Lower Section)
- E85, E86, E90, E91, E92, E93, E84:
Remove left tension strut on suspension strut dome
- E70:
Remove intake filter housing







IMPORTANT: Read and comply with notes on protection against electrostatic discharge (ESD protection). 61 35 ... Notes on ESD Protection (Electro Static Discharge)







Release screws.
Unlock plug (1) and remove.
Pull differential pressure sensor (2) out of intake air manifold.







Installation:
Read out fault memory of control unit of Digital Engine Electronics (DME).
Check stored fault message.
Delete fault memory.