Manifold Pressure/Vacuum Sensor: Service and Repair

13 62 010 Removing and Installing/Replacing Fuel Differential-pressure Sensor (N52/ N52K / N51)







Necessary preliminary tasks:
- E90, E91, E92, E93, E87, E82, E88, E84:
Remove lower section of microfilter housing
- E85, E86, E90, E91, E92, E93, E84:
Remove left tension strut on suspension strut dome
- E70:
Remove intake filter housing







IMPORTANT: Read and comply with notes on protection against electrostatic discharge (ESD protection).







Release screws.
Unlock plug (1) and remove.
Pull differential pressure sensor (2) out of intake air manifold.







Installation:
Read out fault memory of control unit of Digital Engine Electronics (DME).
Check stored fault message.
Delete fault memory.