66 31 ... Replacing Screws on ACC Sensor Unit

66 31 ... Replacing Screws On ACC Sensor Unit







Necessary preliminary tasks:
- Remove ACC sensor







IMPORTANT:
Perform a visual inspection of the sensor housing for damage/leaks.
If damaged, replace the ACC sensor housing.







Clamp sensor housing (1) on screw in vice (2).
Release the screw by twisting the sensor housing (2).

IMPORTANT:
After releasing the screws, check the sensor housing (1) for damage again.
If damaged, replace the ACC sensor housing (1).







NOTE:
For more clarity, the graphic shows the ACC sensor holder removed.

Replace plastic nuts (1).







Carry out rough adjustment of ACC sensor (1) at adjusting screws (2).
- Measurement A [mm]: 42.5 to 43.5







After installation:
- Adjusting ACC sensor