Removing and Installing/Replacing ACC Sensor

66 31 006 - Removing and installing (replacing) ACC sensor





Special tools required:






Necessary preliminary tasks:
- Remove cover for ACC sensor Adjustments





Important!
Secure ACC sensor (2) against falling out.
Cover bumper in working area with adhesive tape (1).

Using special tool 00 9 317, unclip ACC sensor (2) from holders on both sides.

Installation:
ACC sensor must be felt and heard to snap into place.





Important!
Secure ACC sensor (1) against falling out.

Disconnect plug connection (2).





After installation:
- Carry out programming/coding Programming and Relearning.
- Carry out ACC sensor adjustment Adjustments using BMW diagnostic system.





Replacement:
Check preliminary adjustment of ACC sensor (1).
If necessary, carry out preliminary adjustment at retaining pins (2).
- Measurement A: 43 ± 0.5 mm