Distance Sensor: Service and Repair

66 31 006 Removing And Installing (replacing) ACC Sensor







Necessary preliminary work:
- Remove the ornamental grille for the bumper trim (centre)







Undo screws in marked area on the rear side of the ACC sensor (1).
Tightening torque 66 31 1AZ.
Remove ACC sensor from holder (1).







IMPORTANT: Secure ACC sensor (2) against falling out.

Unfasten plug connection (1) and disconnect.
Remove ACC sensor (2).







After installation:
- If applicable, adjust the ACC sensor

Replacement:
- Carry out vehicle programming and encoding
- Adjusting ACC sensor