Operation CHARM: Car repair manuals for everyone.
Home >> BMW >> 2011 >> 528i Sedan (F10) L6-3.0L (N52T) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Engine Control Module >> Description and Operation >> Power Supply And DDE Main Relay
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Supply And DDE Main Relay



Power Supply And DDE Main Relay

The power supply for the DDE control unit is provided via the 8-pin control unit connector.

Function
The power supply to the DDE control unit follows the following sequence when the ignition is switched on:
- With ignition ON, voltage is applied to the DDE control unit via terminal 15WUP and terminal 15_3.
- The DDE main relay is switched via the signal 30B.
- The DDE main relay switches terminal 30 via U_HR to the DDE control unit.

Troubleshooting
The following faults are monitored in the voltage supply system:
- Fault 254E00/254D00: Voltage of power supply to DDE control unit too high/low
- Fault code 274900: DDE main relay switches off too early, possibly due to undervoltage.
pro multis · About Operation CHARM