Operation CHARM: Car repair manuals for everyone.
Home >> BMW >> 2011 >> 740Li (F02) L6-3.0L Turbo (N54) >> Repair and Diagnosis >> Body and Frame >> Body Control Systems >> Body Control Module >> Service and Repair >> 61 35 127 Removing and Installing/Replacing Body Gateway Module
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

61 35 127 Removing and Installing/Replacing Body Gateway Module



61 35 127 Removing And Installing/Replacing Body Gateway Module







IMPORTANT: Read and comply with notes on protection against electrostatic discharge (ESD protection).







Read out programming/encoding.
- Print out and make a note of settings for Car & Key Memory in CKM menu







Necessary preliminary work:
- Disconnect negative battery cable
- Disconnect both negative battery cables at F03
- Remove trim panel for pedal mechanism







Disconnect plug connection (1).
Release screw (2) and remove cable shoe (4).
Tightening torque 61 35 3AZ.
Pull body module (3) out of equipment holder (5) in direction of arrow.

Installation note:
Make sure body module (3) is correctly installed in equipment holder (5).







Replacement:
Carry out programming/encoding.
Perform FlexRay synchronisation via path:
- Body
- Central Gateway Module
- Initialise FlexRay

Check printed-out or noted-down settings for car and key memory in CKM menu and reset if necessary





pro multis · About Operation CHARM