Removing and Installing/Replacing Multifunction Pan

51 71 ... Removing and installing/replacing multifunction pan







Necessary preliminary tasks:

- Remove top trim from tail panel
- Disconnect battery negative lead
- Remove CD changer







Release screws (1).

Remove guide (2).







Release screw (1)







Release screws (1).

Remove cover (2).







Release screw.

Release screws (1).

Carefully remove carbon canister (2) and secure against falling off.







Release screws (1) and remove cover (2).







Release screws and remove holder (1).







Cut open cable tie (1).

Lift out expansion rivet (2).

Unclip wiring harness (3).

Release screws and remove mounting (4).







Release screw.

Lever out expanding rivet (1).

Cut open cable tie (2).

Carefully lay hydraulic lines (3) to one side.







Unclip battery positive lead (1).

Unclip wiring harness (2).

Release nut (3) and disconnect ground cable.

Tightening torque 51 71 16AZ.

Release screw and remove mounting (4).







Release nuts along line.

Tightening torque 51 71 9AZ. Specifications

Remove video module (1) and carefully place to one side.

Remove hydraulic control unit (2), carefully place to one side and secure.

Unlock and disconnect holder (3).

Cut open cable tie (4).

Remove multifunction pan.







Installation:

Seals (1) on multifunction pan (2) must be replaced each time they are removed.