Power Window Motor: Service and Repair

67 62 000 Removing And Installing Or Replacing Flat Motor For Front Left Or Right Power Window Regulator







Necessary preliminary tasks:
- Detach sound insulation from front door in working area







Unlock and disconnect connector (1) from flat motor.







Release screws (1).
Remove flat motor (2) with cable housing.







Release screws (1).
Tightening torque 67 62 1AZ.
Remove flat motor.

Installation note:
Exactly place flat motor on power window regulator gearing.







NOTE: Cable roll (1) must remain in cable housing (2).







Replacement:
A normalization must be carried out in
order to activate anti-trap mechanism. Operating procedure for normalization:
- Operate corresponding power window switch in "Close" setting.
- Once the upper end position has been reached, hold power window switch down for approx. 1 second more.

Normalization is thus completed.







NOTE: Carry out function check (one-touch function, anti-trapping protection and, if necessary, comfort function).