Preliminary Work for ACC Sensor Adjustment

66 31 ... - Preliminary work for ACC sensor adjustment





Special tools required:
- 66 3 150 66 3 150 Socket Wrench for ACC Sensor 2






Necessary preliminary tasks:
Remove underbody protection Removing and Installing/Replacing Front Underbody Protection.





Release screws (2) and remove engine compartment shield brackets (1).

Remove radiator seal (3).

Installation:
Make sure engine compartment shield brackets (1) are correctly seated.





Important!
- Spray all screw threads with rust remover
- Insert all screws evenly





Insert locating bearing screw (1) on ACC sensor holder (2) with Torx screwdriver max. four turns in clockwise direction.





Insert adjusting screws (2) with special tool 66 3 150 66 3 150 Socket Wrench for ACC Sensor 2 max. four turns in counterclockwise direction.