Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 1992 >> Regal V6-191 3.1L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Neutral Safety Switch >> Adjustments
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Neutral Safety Switch: Adjustments

Neutral Start Switch Removal And Adjustment.:




Rear Of Engine:






IMPORTANT: After switch installation, verify that engine will only start in "Park" or "Neutral". If engine will start on any other position, readjust switch.

ADJUST IF NEEDED
- Place transaxle control shifter assembly in the "Neutral" notch in detent plate.
- Loosen switch attaching screws.
- Rotate switch on shaft assembly to align service adjustment hole with carrier tang hole.
- Insert 2.34 mm (3/32 inch) maximum diameter gauge pin to a depth of 15.0 mm (5/8 inch).
- Tighten attaching screws to 25 Nm (18 ft lbs).
- Remove the gauge pin.

pro multis · About Operation CHARM