Service Procedure

PROCEDURE TO BE PERFORMED ON BOTH FRONT ASSEMBLIES

1. Raise hood and remove cover over headlamp (if equipped) by turning knob and folding back.

2. Remove (2) Front Park/Turn Signal housing nuts, remove housing.

3. Remove side marker socket from housing.

4. Remove incorrect (clear) bulb from side marker socket.

5. Install correct (amber) bulb into side marker socket.

6. Install socket into housing and check operation of side marker.

7. Install Front Park/Turn Signal housing. Torque nuts to 7 N.m (62 lb. in.). Reinstall cover (if equipped).

8. Repeat procedure on other Front Park/Turn Signal housing.

9. Install Campaign Identification Label and close hood.