Transaxle Mount

TRANSAXLE MOUNT 4T60 (440-T4)

Transaxle Mounts:

REMOVE OR DISCONNECT
1. Raise vehicle and suitably support.
2. Support transaxle with jackstand.
3. Transaxle bracket. Refer to "Transaxle Bracket".
4. Bolts and nuts attaching mount support to frame.
5. Mount support.
6. Nuts attaching mount to support.

INSTALL OR CONNECT
1. Mount and attaching nuts to support.

TIGHTEN
^ Nuts to 47 Nm (35 lb. ft.).

2. Support and attaching bolts and nuts to frame.

TIGHTEN
^ Bolts to 58 Nm (43 lb. ft.).
^ Nuts to 44 Nm (32 lb. ft.).

3. Transaxle bracket. Refer to "Transaxle Bracket".
4. Remove jackstand.
5. Lower vehicle.