Automated Test

This test cycles each valve solenoid and the pump motor (as well as the necessary relays) in order to verify component operation. This test is identical to the Initialization Sequence. If a malfunction is detected, the EBCM will set DTCs. The DTC;s will be displayed upon completion of the test.

Perform the following test:
1. Turn OFF the ignition.
2. Install a scan tool.
3. Turn ON the ignition, with the engine OFF.
4. Select the Special Functions from the DRP/ABS/TCS/TIM/VSES menu.
5. Select the Automated Test.
6. Run the Automated Test.
7. Record any DTCs that were set.