Recirc Setting

When you select the recirc mode, the programmer energizes the air inlet actuator. The air inlet actuator positions the air inlet valve to the recirculate position. The recirc mode operates in the following modes:
^ FLOOR/WINDSHIELD
^ MID/FLOOR
^ MID
^ FLOOR

Recirc is not allowed during the FRONT DEFROST mode. This may cause windshield fogging.

The RECIRC function will operate for the entire ignition cycle. Pressing the RECIRC button with the system OFF, will return the system to the last setting (prior to the system being turned OFF).